Suitability · 4 min read
Can you wrap laminate, melamine and veneer cabinets?
Yes, and laminate and melamine are actually two of the best surfaces to wrap. So are timber veneer, MDF and customwood, previously painted or 2-pack joinery, metal and glass. The one thing that matters isn't what the surface is made of, it's whether it's sound, smooth and clean. Anything water-swollen, crumbling or heavily worn is repaired or replaced first. Send photos and we'll tell you honestly whether your kitchen is a straightforward wrap, needs a little prep, or isn't suited, before you spend anything.
Surfaces that wrap well
Most kitchen, wardrobe and bathroom surfaces fall into this group. If yours is here and in sound condition, it's usually a straightforward wrap:
Laminate and melamine
The most common cabinet and benchtop surfaces in Australian homes, and among the easiest to wrap. Smooth, stable and made to bond to.
MDF and customwood
Flat-pack and custom joinery boxes, doors and panels take film beautifully once cleaned and keyed.
Timber and timber veneer
Real timber and veneer wrap well; we prep back any old lacquer or oil so the film keys properly.
Previously painted or 2-pack
Sound painted or two-pack doors can be wrapped straight over, no spray booth or fumes.
Metal, glass and splashbacks
Rangehood canopies, metal panels, glass splashbacks and feature surfaces can all be wrapped to tie a look together.
What needs prep first
These don't rule out a wrap, they just add a step. We sort them before any film goes on, and flag the cost in your fixed quote:
Chips, dents and worn edges
Filled and smoothed back so the film sits flat, with nothing to telegraph through.
Old or peeling vinyl
Removed completely and the surface prepped back to sound. We never wrap over failing film.
Grease, heavy gloss or silicone
Cleaned and keyed so the film can actually bond, the step most DIY wraps skip.
What a wrap can't fix
We'd rather lose the job than wrap the wrong thing. A door that's water-swollen, delaminating or crumbling gets repaired or replaced first, because film needs a sound base. Heavily carved or intricately profiled doors have limits we'll be upfront about. And if you want to change the layout or the carcasses themselves are shot, that's custom cabinetry, not a wrap, and we'll tell you so.
How we check yours
You don't need us on site to find out. Send a few photos of your doors, panels and benchtop through the quote form, along with a note on anything that's damaged or lifting. We'll tell you honestly whether it's a straightforward wrap, needs a little prep first, or isn't suited, and send a fixed price either way. No charge, no site visit, no pressure.
Common questions
- Can you wrap laminate benchtops?
- Yes. Laminate is one of the easiest surfaces to wrap, and a benchtop wrap in a stone or marble look is a popular way to lift a whole kitchen without a new slab.
- My doors are melamine, will the film stick?
- Yes. Melamine is smooth and stable, which is exactly what film bonds to best, once it's properly cleaned and keyed. It's a textbook surface for wrapping.
- Can you wrap real timber or veneer?
- Yes. We prep back any old lacquer or oil first so the film keys to a sound surface, then wrap as normal.
- What about a shaker or heavily profiled door?
- Flat and lightly profiled doors wrap cleanly. Deeply carved or very intricate profiles have limits, and we'll tell you honestly from your photos whether yours will look right wrapped.
Thinking about it for your kitchen?
Send a few photos and rough sizes for a fixed quote within one business day. No obligation.